LAM-THE CLEANER Lambert The Cleaner RF Filter - The Lambert Company

Information

The Cleaner is designed to go between your AC supply, and the device you are using to play your music. Thus it has an IEC input, and an IEC output, plus a supplied cable to go from The Cleaner to your music device. Simply disconnect the IEC end of your current power cable from your audio device, and plut it in to the input of The Cleaner. Then take the supplie IEC to IEC cable, and plug it in to the out put of The Cleaner, and then in to your Audio device.

The Cleaner will operate on any AC voltage up to but not exceeding 300 volts.

The Cleaners job is to block the RF and thus the white noise the comes with it. Because this (almot subliminal) white noise is roughly equal in each channel, it "mono-izes' the Audio, and the addition of The Cleaner to the system will instantly increase Stereo width, and also front-to-back depth. It may seem subtle, but take it away, and you know how effective it has been.

The Cleaner works best with coltage-gain devices, such as pre-amplifies, and source components. It also works with power amplifiers, but is more noticeable use further up the signal chain. Because it does not limit, or change, the basic AC, you can safely use it on any component that you would normally plug in to a standard wall socket.