AudioQuest 2.0M PR ROCKET 44 SBW-BFAS

Information

Rocket 44 Single-BiWire

Solid Perfect-Surface Copper+ (PSC+) and Perfect-Surface Copper (PSC) Conductors
This cable uses a carefully finessed combination of Perfect-Surface Copper (PSC) and extremely high purity Perfect-Surface Copper+ (PSC+) conductors. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. Extremely high-purity PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.

Carbon-Based Noise Dissipation
This cable's negative conductors are covered with partially conductive Carbon-Loaded Polyethylene. This remarkable material reduces radio-frequency garbage being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and improved dimensionality that comes whenever RF interference is reduced in an audio circuit. In addition, a carbon layer damps interaction between positive and negative conductors, and an external Carbon-Based Noise-Dissipation System reduces external interference.

Double Star-Quad Geometry
The relationship between conductors defines a cable's most basic electrical values (capacitance and inductance). However, even when those variables are kept in reasonably neutral balance, the particular geometric relationship between conductors greatly affects the sound. Star-Quad geometry is not only vastly superior to conductors run in parallel, but also to the same conductors as two twisted pairs.

Foamed Polyethylene Insulation
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. This cable, however, uses air-filled Foamed-Polyethylene Insulation on both conductors. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

• Solid Perfect-Surface Copper+ & Perfect-Surface Copper Conductors: Solid conductors prevent electrical strand-to-strand interaction, a major source of distortion. The smooth surface of AudioQuest’s conductor metals nearly eliminates harshness and greatly increases clarity compared to lesser materials.
• Double Star-Quad Geometry: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). AudioQuest’s Double Star-Quad geometry is vastly superior to conductors run in parallel as well as to the more common twisted pairs, resulting in less distortion.
• Carbon-Based Noise-Dissipation System: This cable’s negative conductors are covered with partially conductive Carbon-Loaded Polyethylene, which prevents radio-frequency noise being fed back into the amplifier. The reduction in external interference results in clearer sound and greater dimensionality.
• Foamed-Polyethylene Insulation: Most common insulation materials absorb energy, some of which is stored and then released as distortion. With its high air content and benign distortion profile, AudioQuest’s Foamed-Polyethylene causes much less of the out-of-focus effect common to other materials.
• Direction-Controlled Conductors: A fundamental aspect of AudioQuest's multifaceted Noise-Dissipation technology, Direction-Controlled Conductors assure induced noise is dissipated and drained properly.