MartinLogan Tribute 5XW In-Wall Speaker
|
|
Information
MartinLogan's signature Folded Motion tweeter is a miracle of audio engineering. Its folded thin-film diaphragm gives it a much larger surface area than traditional dome tweeters of the same size. This "squeezing" design requires significantly less excursion than a dome tweeter, too, revealing controlled dispersion characteristics and vanishingly low distortion. These tiny tweeters mimic the high-frequency detail and response speed of a large electrostatic panel in a small space. Masterpiece CI Series steps up the game with the Folded Motion XT Obsidian tweeters, which advance thin-film transducer technology even further.
At a Glance
- Model: MartinLogan Tribute 5XW
- Sold as: Single (price is each)
- Available Finishes: White
- Frequency Response: 71–25,000 Hz ± 3 dB
- Tweeter Dispersion (horizontal x vertical): 80° x 30°
- Sensitivity: 94 dB @ 2.83 volts/ meter
- Impedance: 4 ohms. Compatible with; 4, 6, or 8 ohm rated amps.
- Crossover Frequency: 2250 Hz
- High Frequency Driver: 1.25 x 2.4 inch (3.2 x 6.1 cm); Folded Motion XT Obsidian; transducer with 4.5 x 2.75 inch; (11.4 x 7 cm) diaphragm.
Features
Key Features
Folded Motion® XT Obsidian Tweeters
MartinLogan's signature Folded Motion tweeter is a miracle of audio engineering. Its folded thin-film diaphragm gives it a much larger surface area than traditional dome tweeters of the same size. This "squeezing" design requires significantly less excursion than a dome tweeter, too, revealing controlled dispersion characteristics and vanishingly low distortion. These tiny tweeters mimic the high-frequency detail and response speed of a large electrostatic panel in a small space. Masterpiece CI Series steps up the game with the Folded Motion XT Obsidian tweeters, which advance thin-film transducer technology even further.
Powerful Mid-Frequency and Bass Drivers with Unidirectional Carbon Fiber Multi-Section Cones with Nomex® Backers
Masterpiece CI loudspeakers feature cones custom-built using unidirectional carbon fiber, a material that is twice as strong as steel but with a sixth of the density, for exceptional rigidity without excessive weight. They are designed in multiple sections to take full advantage of the benefits of this material. Each cone is reinforced by a Nomex backer, for additional damping that prevents ringing and reduces breakup modes in these extremely rigid cones. The drivers feature powerful, efficient magnet structures, enabling massive excursion and huge sound output, while preserving deep bass details, even at sustained, lifelike volume levels.
Driver Engineering Details
To deliver accuracy in the critical midrange, mid-frequency drivers feature a specially engineered “stiff” suspension. Stiffening the suspension (the spider and surround) raises the driver’s resonant frequency and optimizes its performance to achieve a natural roll-off and inherently operate within an ideal range for a mid-frequency reproduction (as opposed to a comparably sized woofer). Each cone includes a concave dust cap that adds additional strength and rigidity while further reducing break up modes. An inverted surround design maximizes clearance behind the grille cover to enhance driver excursion, clarity, and linearity.
Phenolic Baffle and Sealed Back Box Enclosure
One key to replicating the performance of traditional loudspeakers with hidden, built-in speakers is the use of sealed, controlled-volume, back boxes. Statement 40XW, Monument 7XW, Tribute 5XW, and Icon 3XW, feature baffles of incredibly dense phenolic resin polymer fronted by an aluminum faceplate. This phenolic resin polymer is the same material we use in the Neolith's massive, acoustically-inert cabinet. It offers extraordinary material consistency that naturally minimizes deleterious resonances and vibrations. Masterpiece CI back boxes fit into standard stud walls.
Die-cast Aluminum Mounting-Lock System
A simple, yet robust die-cast aluminum mounting-lock system maximizes strength while allowing quick, trouble-free installation. Pocketed screw holes help hold the drill steady, making installation a snap. When not in use, mounting locks are secured within a self-contained housing. When moved into place, they couple the chassis firmly to the ceiling or wall, increasing the rigidity of surfaces. If ever removed, the locks retract and latch back in their housings. Each speaker includes a full-size installation template featuring quick-reference instructions, and die-cut guides for marking the cutout hole.
Spring-Loaded Binding Posts
With easy pre-installation access, our spring-loaded binding posts feature a large 4.5mm wire access hole and connect via banana plug, pin, or 10AWG bare wire.
Proprietary Vojtko™ Crossover Networks
Vojtko Crossovers are named after MartinLogan's chief audio technologist, Joe Vojtko. His unique approach to crossover design is just as crucial to MartinLogan's Truth in Sound as are our innovative electrostatic and Folded Motion thin-film driver technologies. A Vojtko Crossover isn't just a set of design requirements; it's a philosophy. Vojtko Crossovers are hand-built from the highest quality components and avoid overly complex topologies. This crossover has a straightforward objective: breathtaking realism.
Hand-Selected Components
In designing each crossover topology, we take the drivers themselves into consideration. Carefully selected drivers, engineered for specific performance characteristics, are kept within their optimal frequency range by the custom Vojtko Crossover. Each crossover is handcrafted using exceptional polypropylene and polyester capacitors, custom wound and large steel laminate low-DCR inductors, and double thick PCBs. This precision-tuned network preserves even the most microscopic sonic nuances while handling the full dynamics of any source. It's a recipe for vanishingly low distortion and seamless driver integration.
On Wall Frames (sold separately)
The appeal of in-wall speakers is well understood, but sometimes it’s just not a practical option. Whether your room’s construction prevents it, or you are just looking to create a more personalized look, these on wall frames transform the Masterpiece CI in-wall speakers into incredible on-wall speakers! At only 4.5” deep, these on wall frames make the Icon, Tribute, or Monument in-wall speakers the perfect solution for a relatively low profile on-wall speaker. Their built-in, sealed enclosures make sure that you get consistent sound no matter which method you choose.
Pre-Installation Brackets (sold separately)
Pre-installation brackets are available for every model in the Masterpiece CI Series, except for the Statement 40XW, which requires unique considerations for installation.
Specifications
| Frequency Response | 71–25,000 Hz ± 3 dB |
| Tweeter Dispersion (horizontal x vertical) | 80° x 30° |
| Sensitivity | 94 dB @ 2.83 volts/ meter |
| Impedance | 4 ohms. Compatible with 4, 6, or 8 ohm rated amps. |
| Crossover Frequency | 2250 Hz |
| High Frequency Driver | 1.25 x 2.4 inch (3.2 x 6.1 cm) Folded Motion XT Obsidian transducer with 4.5 x 2.75 inch (11.4 x 7 cm) diaphragm. |
| Tweeter Aiming | Rotatable tweeter for horizontal or vertical installations |
| Low Frequency Driver | Two 5.25-inch (13.33 cm) black unidirectional carbon fiber multi-section cone with Nomex® backer and cast aluminum basket, sealed back chamber format. Concave dust cap. |
| Passive Radiators | Two 6.5-inch (16.5 cm) black unidirectional carbon fiber multi-section cone with Nomex® backer and cast aluminum basket, sealed back chamber format. Concave dust cap. |
| Components | Custom air core coil inductors, polypropylene film capacitors, and low DF electrolytic capacitors. Thermal/current protection. |
| Suitable Amplifier Range | 20–250 watts |
| Max Power Handling | 125 watts |
| Binding Post Inputs | Push style (two sets for easy installation) |
| Weight | 25.5 lb (11.6 kg) |
| Dimensions (overall size) | 31.13 x 10.6 x 4.09 inch (790.82 x 269.2 x 103.93 mm) |
| Required Wall Opening (includes tolerance) | 29.82 x 9.29 inch (757 x 236 mm) |
| Projection From Wall Surface | 0.31 inch (7.8 mm) |
| Depth Behind Wall Surface | 3.8 inch (96.5 mm) |
| Optional Accessories | Pre-install bracket (PN: 5XWBRK) |
Available Finishes & Product Codes
| White | ML-TRIBUTE-5XW |
Links
Downloads
- MartinLogan Tribute 5XW – Masterpiece CI On-Wall Frame Instructions (PDF)
- MartinLogan Tribute 5XW – Brochure (PDF)
- MartinLogan Tribute 5XW – Manual (PDF)
- MartinLogan Tribute 5XW – Pre-installation Brackets (PDF)
- MartinLogan Tribute 5XW – Spec Sheet (PDF)
- MartinLogan Tribute 5XW – Dimension Drawings PDF (PDF)
Book a Demo / Ask an Expert
Contact Details
Request More Information
Details of the product above will be automatically included with your enquiry.
Associated Items
View your shopping basket or Browse other items in MartinLogan Custom Install Speakers.
