Coloured speaker, uncoloured sound. Accurate and powerful, the SR35 loudspeakers deliver controlled, dynamic sound with exceptional detail and clarity to light up your listening room . Available in any colour of your hearts desire - or black.

Hand-crafted cabinets

Each cabinet is meticulously crafted and lovingly finished by hand to produce a truly beautiful loudspeaker. Available in a choice of real wood veneers or hand painted and finished in your choice of custom colours - any colour of your hearts desire - the SR35 loudspeakers will blend-in or stand-out in your listening environment.

Rigid cabinet design

The robust 25mm thick, rigid, highly damped and internally-braced, high density MDF floor-standing enclosure provides excellent mechanical stability that ensures accurate driver response and controls unwanted cabinet resonances. The resulting sound is powerful, accurate, open and highly detailed.

High definition tweeter

The lightweight Sonomex fabric dome tweeter provides the SR35 with a smooth yet detailed high frequency response, producing a crisp, bell-like performance.

Low distortion woofers

The mid/bass woofers have a lightweight copper clad aluminium wire (CCAW) voice coil that generates precise, low-distortion signals with excellent transient response; while the coated paper cone provides an extended frequency response with a controlled roll off.

MTM configuration

The MTM driver configuration, pioneered by D'Appolito to correct lobe tilting inherent in conventional mid-tweeter configurations, controls vertical sound dispersion – greatly reducing ceiling and floor reflections, providing a sound that is wide, accurate and engaging.

Solid aluminium baffle

The 12mm thick machined aluminium baffle provides excellent mechanical stability that ensures accurate driver placement and controls unwanted cabinet resonances. The result is a sound that is extremely dynamic with crystalline clarity and detail.

Audiophile crossover

The linearity and low distortion of the low-loss air core inductors, teamed with the low inductance and linear impedance characteristics of the audiophile-grade polypropylene capacitors, produce a clean signal path with very low signal loss .

Built to last

Mechanical strength, reliability and longevity have always been the hallmarks of PERREAUX's audio designs. The SR35 is a rugged, powerful, high performance speaker. Order yours for life.

Speaker System:

2-way floorstanding MTM vented loudspeaker

Tweeter:

22mm (¾") high definition Sonomex dome

Woofers:

2 x 130mm (5") long-throw coated paper cone

Frequency Range:

33Hz–30kHz, at -6.0dB

Frequency Response:

45Hz–20kHz, at ±2.5dB

Crossover Frequency:

2650Hz

Impedance:

4Ω nominal, according to IEC 268-5 3.2Ω minimum

Sensitivity:

93dB SPL, at 2.83V/1m 90dB SPL, at 1W/1m

Power Handling:

120W long term, according to IEC 268-5 250W short term, according to IEC 268-5

Suggested Amplifier Power:

25W–150W, without clipping

Available Finishes:

Walnut, real wood veneer Rimu, real wood veneer Mahogany, real wood veneer Oak, real wood veneer Custom hand painted in your choice of colour and finish