AM300

The AM300 power unit is suitable for most HIFI or audio-video applications. Very scalable, it can be used alone or in bi-amplification. It can be associated with an integrated amplifier or an ATOLL preamplifier. It can be bridged as a mono block via an internal switch. It is equipped as standard with a 12V Trigger input (direct ignition in connection with a preamp).

8mm brushed aluminum front.
Power 2×150 W / 8Ω.
2 toroidal transformers of 440 VA each.
Filter capacitors: 8×6800 μF high quality, low ESR specific for ATOLL.
Triple push-pull MOS-FET power stage.
Integral dual mono architecture.

Balanced XLR and RCA line inputs.
Balanced audio stages with discrete components.
6 MOS-FET power transistors per channel.
Polarization of the output stages in class A/B.
Double-sided circuit boards with nickel/gold finish.
Bridgeable in mono block.
12V Trigger input.

Thanks to its RCA and XLR input, the AM300 power amp can be easily combined with any ATOLL hi-fi or home cinema pre-amplifier .

CONNECTIVITY

Audio Inputs

1 Stereo line input.
1 Stereo XLR input

Audio Outputs

1 Stereo line output.
1 Stereo speaker output.

Miscellaneous

1 12V Trigger Input.
1 Bridged-mono switch.
1 Line/XLR switch.

View the standard for XLR connector wiring

Power Wrms/channel/8Ω (230v): 150 W
Power Wrms/channel/4 Ω (230v): 280 W
Power in mono/8 Ω bridged mode: 500 W
Power supply: 2×440 VA
Total capacitance: 83,300 μF
Number of Stereo inputs: 1 RCA + 1 XLR
Bandwidth: 5 Hz – 200 kHz
Rise time: 1.5 μs
Input impedance: 220 kΩ
Sensitivity: 1.7 V
Signal/noise ratio: 100 dB
Distortion rate at 1 kHz: 0.005%
Dimensions: 440×351×103 mm
Weight: 16 Kg